Image of Bandpass Cavity Filters



15-88-01, 890-960 MHz, Vari-Notch Cavity Filter
The Vari-Notch® design passes a relatively narrow band of frequencies and rejects (notches out) a relatively wide frequency band. Equivalent to a combination series-tuned and parallel-tuned circuit, this filter has a greater notch depth than the Series- Notch® design. The notch depth is adjustable but varies with passband insertion loss (0.3dB or 0.6dB typical) and the difference between pass and notch frequencies. Vari-Notch® is ideal for moderately close to wide separations (400 KHz and greater) in UHF applications.

  • Various Low-Loss High-Rejection Models to choose from.
  • All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
  • Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.


Cascading Filters
All cavity types mentioned above may be cascaded to achieve an arithmetic sum of individual filter attenuation. Up to 6 dB of additional attenuation can be achieved when the proper length of cable is used to interconnect the cavities. (This additional 6 dB does not occur in the filter passband but only at frequencies where moderate to high attenuation occurs.) A TX RX system specialist can assist you in ordering the proper length of interconnecting cable for your frequencies.





Product Specifications 
Item No15-88-01
Item Name890-960 MHz, Vari-Notch Cavity Filter
Frequency Range890-960 MHz
Minimum Separation - Pass to Notch500 kHz
Frequency Separation500 kHz
1 MHz
2 MHz
10 MHz
Attenuation vs Pass to Notch15 dB @ 500 kHz
23 dB @ 1 MHz
31 dB @ 2 MHz
48 dB @ 10 MHz
Power Rating150 W
Impedance Ω50
VSWR1.25:1 max.
Cavity Length - Electrical1/4λ Low Pass
Temperature Range-30 to +60 °C
Cavity Diameter4"
Number of Cavities1
Cavity Height6.5" w/ tuning rod extended, 10" max.
Shipping Weight3 lbs.