11-35 Series

Image of Bandpass Cavity Filters

11-35 Series

 

11-35 Series, 108-136 MHz, Bandpass Cavity Filters pass one narrow band of frequencies and attenuates all others with increasing attenuation above and below the pass frequency. It is equivalent to a parallel-tuned circuit and is most often used for general transmitter spurious clean-up or a sharpening of a single receiver front end selectivity with or without amplification. TX RX bandpass cavities (4", 6", 8” and 10") have adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting.

  • Various Low-Loss High-Rejection Models to choose from.
  • All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
  • Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.

 

11-35 Series, Cavity Filters

Model NumberCavity Size,diameter (inches)Number of CavitiesDiminsions, H x W x D (inches)Shipping Weight, lbs.
11-35-016.625 131.5 x 6.625 x 6.625 20
11-35-02 6.625 231.5 x 6.625 x 6.625 42
11-35-0510133.5 x 10 x 10 27
11-35-0610233.5 x 10 x 1056

 


Downloads:

Manual


 

Product Specifications 
Item No11-35 Series
Item NameBandpass Cavity Filters
Frequency Range108-136 MHz
Max Power per Cavity270 W, per cavity @ 0.5 dB IL
60W, per cavity @ 3.0 dB IL
Impedance Ω50
VSWR1.25:1 max.
Cavity Length - Electrical1/4λ
Temperature Range-30 to +60 °C
Cavity Diameter6.625" or 10"
Number of Cavities1 or 2
ConnectorsN

Accessories:

Image of Cavity Filter Loop Kits

Cavity Filter Loop Kits